Advanced Trains

User Tools

Site Tools

You are here: Advanced Trains » User Guide » Line Automation » Station/Stop Rail
usage:lines:stoprail

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

usage:lines:stoprail [2020-02-06 09:07]
orwell created 		usage:lines:stoprail [2020-02-06 09:12] (current)
orwell
Line 7: Line 7:
 The stop rail affects only trains travelling in the direction the arrow on the rail points. The stop rail affects only trains travelling in the direction the arrow on the rail points.
  
-Once a train approaches a stop rail, it is matched against the [[usage:interlocking:ars|ARS Rules]] of that rail. If this determines that the train should stop, the train starts braking (by imposing a temporary speed restriction of 2 on the track).+Once a train approaches a stop rail, it is matched against the [[usage:interlocking:ars|ARS Rules]] of that rail. If this determines that the train should stop, the train starts braking (by imposing a temporary speed restriction of 2 on the track), and the inside text is set to "Next Stop: <station name>".
  
-Once the train enters the stop rail (if it should stop), it brakes to stand and opens the doors on the specified side. It then waits the specified wait time using simple ATC.+Once the train enters the stop rail (if it should stop), it brakes to stand and opens the doors on the specified side. The inside text is set to the station name. It then waits the specified wait time using simple ATC.
  
-After that, the doors are closed. If reversing is enabled, the train reverses direction now. Then it departs using the specified departure speed.+After that, the doors are closed. If reversing is enabled, the train reverses direction now. Then it departs using the specified departure speed. The inside text is cleared.
  
 With the luaatc_extensions branch enabled, the train disables ARS when approaching a stop rail, and enables it again when departing. This prevents a signal behind the stop rail from setting a route before the train's departure. With the luaatc_extensions branch enabled, the train disables ARS when approaching a stop rail, and enables it again when departing. This prevents a signal behind the stop rail from setting a route before the train's departure.
Line 17: Line 17:
 ===== Stations and Station names ===== ===== Stations and Station names =====
  
-The "Station Code" serves as an identifier of the station this stop rail belongs to. The "Station Name" is saved with the Station Code and global across all stop rails. If you add a stop rail to a station, only input its station code, the name will be filled in automatically.+The "Station Code" serves as an identifier of the station this stop rail belongs to. The "Station Name" is saved with the Station Code and is global across all stop rails. If you add a stop rail to a station, only input its station code, the name will be filled in automatically.
  
-The station code is also associated with an owner. By default, only the owner of the station is allowed to modify details in its station rails.+The station code is also associated with an owner. By default, only the owner of the station is allowed to modify details in its station rails. Players having the [[usage:privileges:train_admin]] privilege can always modify any station rail.
usage/lines/stoprail.1580980078.txt.gz · Last modified: 2020-02-06 09:07 by orwell

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki