Advanced Trains

User Tools

Site Tools

You are here: Advanced Trains » User Guide » Advtrains Tutorial
usage:howto

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
usage:howto [2019-07-02 10:32]
82.67.173.193 changed bold to monospace 		usage:howto [2022-07-01 09:04] (current)
56independent [Signals] grammar
Line 56: Line 56:
 {{:usage:switch-example.png?nolink&400|}} {{:usage:switch-example.png?nolink&400|}}
  
-The rail above the blue marker is the switch. Otherwise, rails are placed only above red markers.+The rail above the blue marker is the switch. Otherwise, rails are placed only above red markers. Right click the switch (without the trackworker) to toggle it.
  
-===== Rail crosses ===== +There are also Y-turnouts and 3-way turnouts. These turnouts have their own placers. 
-There is no dedicated node. However, crossing rails can be created by placing opposite 45-degree rails:+ 
 +===== Rail crossings ===== 
 +There are currently three types of crossings tracks with their corresponding placers: 
 +  * Perpendicular diamond crossings: crossings where the two tracks are perpendicular to each other 
 +  * 90+Angle diamond crossings: crossings where one of the two tracks is parallel to the X or Z-axis 
 +  * Diagonal diamond crossings: other crossings that do not fit into the categories listed above 
 + 
 +Note that currently there are only crossings for two tracks, and certain shallow crossings are not available. 
 + 
 +Additionally, crossing rails can be created by placing opposite 45-degree rails:
  
 {{:usage:cross-opposite-45-rails.png?nolink&400|}} {{:usage:cross-opposite-45-rails.png?nolink&400|}}
Line 107: Line 116:
  
  
-Signals indicate if trains may pass or not. They may also be rotated by the [[usage:nodes:trackworker|Trackworker]]. There are an analog signal and an electric signal. They are crafted as follows:+Signals indicate if trains may pass or not. They may also be rotated by the [[usage:nodes:trackworker|Trackworker]]. There are analog signals and electric signals. They are crafted as follows:
  
 {{:usage:craft-analog-signal.png?nolink&400|}} {{:usage:craft-analog-signal.png?nolink&400|}}
Line 113: Line 122:
  
 Right-click (or double tap on Android) the signal or power it with a [[usage:mods:mesecons|mesecons]] signal to turn it green. To change to red again, right-click a second time or discard the [[usage:mods:mesecons|mesecons]] signal. Right-click (or double tap on Android) the signal or power it with a [[usage:mods:mesecons|mesecons]] signal to turn it green. To change to red again, right-click a second time or discard the [[usage:mods:mesecons|mesecons]] signal.
-Used as-is, the signals can only signal the driver; they don't have any effect on trains.+Used as-is, the signals can only signal the driver; they don't have any effect on trains. Press ''shift''+''e'' whilst right-clicking on the signal to set an influence point. You then punch the rail just before the signal, whilst looking in the driving direction.
  
 ==== Platforms ==== ==== Platforms ====
Line 119: Line 128:
  
  
-Platforms indicate where passagers should get on the train. There are low and high platforms:+Platforms indicate where passengers should get on the train. There are low and high platforms:
  
 {{:usage:craft-low-platform.png?nolink&400|}} {{:usage:craft-low-platform.png?nolink&400|}}
 {{:usage:craft-high-platform.png?nolink&400|}} {{:usage:craft-high-platform.png?nolink&400|}}
  
-There is a variant, crafted with sandstone instead of stone, included in the modpack. However, more and more platforms are included in this [[http://git.bananach.space/advtrains_platform.git|Minetest mod]]. As well you can [[reference:advtrains:register_platform|create your own]].+and also diagonal platforms that can be high or low - the high platform recipe is shapeless: 
 + 
 +{{:usage:craft-diagonal-platform-high.png?nolink&400|}} 
 +{{:usage:craft-diagonal-platform-low.png?nolink&400|}} 
 + 
 +When a player is standing near the platform edge and a train stops with its doors open at the platform, players board the train automatically. This does not work for diagonal platforms yet. 
 + 
 +There is a variant, crafted with sandstone instead of stone, included in the modpack. However, more and more platforms are included in this [[http://git.bananach.space/advtrains_platform.git|Minetest mod]]. You can also [[dev:core:funref:register_platform|create your own]]. 
 + 
 +You might want to use low platforms when possible, as they align better with the floor of many trains. However, you might want to use high platforms for heavy rail and low platforms for light rail.
  
 ==== Detector rail ===== ==== Detector rail =====
Line 135: Line 153:
  
 ===== Trains ===== ===== Trains =====
-//Main article: [[usage:trains|Trains]]//+//Main article: [[usage:trains:start|Trains]]//
  
  
 ==== Train overview ==== ==== Train overview ====
  
-The most important part of this mod are trains. There are some included in the modpack, but community members made more trains:+The most important part of this mod are trains. There are some which you are assumed to have, but community members made more trains:
  
   * [[https://github.com/mbblp/advanced-trains-website/blob/master/trainhub/index.html]] (original link in the [[https://forum.minetest.net/viewtopic.php?f=11&t=14726|forum post]] is broken)   * [[https://github.com/mbblp/advanced-trains-website/blob/master/trainhub/index.html]] (original link in the [[https://forum.minetest.net/viewtopic.php?f=11&t=14726|forum post]] is broken)
Line 184: Line 202:
 Manual operation Manual operation
 </code> </code>
 +//(See [[.using_stock:train_hud]] for more information about the display.)//
  
 The ''[F]'' shows whether the train is driving forward or in reverse direction. The ''[F]'' shows whether the train is driving forward or in reverse direction.
-The upper bar is the train's current speed, while the lower bar shows what speed you ordered the train to hold - or **Manual operation** if you manage the speed yourself. Assuming you have the [[https://wiki.minetest.net/Controls|default controls]], the following key bindings apply:+The upper bar is the train's current speed. The lower bar normally says "Manual operation" - that means the train is controlled by a train driver(you). 
 + 
 +It might also show an "ATC" bar, in which case the train is in "Automatic Mode" and will always try to reach and hold the speed shown. This mode is activated when the train receives an ATC command or you enter a "set speed" key combination. You can then switch back to manual mode by pressing the "Brake" key once. 
 + 
 +Assuming you have the [[https://wiki.minetest.net/Controls|default controls]], the following key bindings apply:
  
   * W: faster   * W: faster
   * S: slower   * S: slower
   * A/D: open and close left/right doors   * A/D: open and close left/right doors
-  * Space: brake (shown by >B<, target speed will be decreased automatically)+  * Space: brake (shown by >B<, switches to "manual operation")
   * Sneak+S: set speed to 0 (brake to stop!)   * Sneak+S: set speed to 0 (brake to stop!)
   * Sneak+A: set speed to 4 (~ 15 km/h)   * Sneak+A: set speed to 4 (~ 15 km/h)
   * Sneak+D: set speed to 8 (~ 30 km/h)   * Sneak+D: set speed to 8 (~ 30 km/h)
   * Sneak+W: set full speed   * Sneak+W: set full speed
-  * Sneak+Space: toggle brake (brake will not release when releasing the keys, shown by >^B<)+  * Sneak+Space: Show the Onboard Computer 
 +  * Sneak+E: Exit the train
  
 ==== Coupling wagons ==== ==== Coupling wagons ====
usage/howto.1562063526.txt.gz · Last modified: 2019-07-02 10:32 by 82.67.173.193

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki